|
|
Autosalon in Jihlava
Mátlová, Michaela ; Balázs, Ivan (referee) ; Pešek, Ondřej (advisor)
The aim of my thesis was to propose two variants of the steel construction of the car showroom. The ground dimensions of the structure are 35 x 50 meters. The building reaches a height of 8.8 m above the surrounding terrain. The building consists of two parts. The exhibition part of the car showroom will be partially glazed and also includes office space. The second part is the adjacent car workshop. The variants differ in the construction of the enclosure of the exhibition part of the car showroom. The work includes two static designs of the supporting steel structure of the car showroom. The winning variant of the frame construction a solution of selected details and drawing documentation.
|
|
|
Car Showroom
Smrčka, Václav ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The aim of the thesis is to design and appreciation steel load-bearing structure of motor show. The object is situated in Brno. The Structure consist of tubes and rolling sections. The breadth of construction is 36,5m, lenght 42m and height in the heihest point is 13,2m. The structrure is consists of three parts. Show room, offices and workshop. The height of show room is 20m, offices 8,5m and workshop 8m. The show room consist of arched truss girder. The distance of each cross links is 6 m. Structural design were perfomered by Scia Engineer 2017 and hand computation.
|
|
|
The Steel Structure of Car Showroom
Buchta, Vojtěch ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor)
The task of the thesis was to design a draft and a review of car’s showroom supporting structure. The object is located in the city of Hradec Králové. Floor plan has a size of 30 x 15 m, the height of the object is 7 m at the highest point. The mono-pitched roof is formed by two parts on the same slope 3.81 °. Material of all components is steel S235. All calculations were performed in accordance with valid standards. The structure consists of a load-bearing columns fixed to the ground, the truss girders are designed of hollow cross-sections, pin-suported by the columns. The purlins are pin supported by upper chords of a truss girder, with the lower and upper edges flushing. Purlins support the roof made of roof-panels by Kingspan, thickness 160 mm. Wall casing the technical parts of the object is formed also by system panels by Kingspan. The cladding of the sales area is made of glass panels by Reynaers.
|
|
|
The load bearing steel building structure of the car showroom
Hubáček, Ondřej ; Karmazínová, Marcela (referee) ; Melcher, Jindřich (advisor)
This work contains a proposal supporting steel structure of the single- industrial buildings intended for parking motor show / exhibition cars in Brno. Building plan dimensions are 20 x 36 m. The main structure is defined by a planar cross-linked. Transverse bond is formed trusses, connected by purlins. Trusses are on both sides of the structure hinged to the fixed columns. The main beam is made up of trusses with an installation height of 1,5 m at midspan. Distance crosslinks is 6 m. Spatial rigidity is ensured by a system of longitudinal transverse stiffeners. Steel truss rods are made of rolled profiles are pillars of HEB profiles and purlins are designed from rolled profiles I. The design is carried out according to standards EN. Used material bearing elements is steel S 235 (regular steel).
|
|
|
Auto show
Václavík, Marek ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
This thesis covers brand new detached showroom with one basement and two floors. The building is divided into 2 parts, the major part of the first floor sample room (showroom) for a maximum of 13 vehicles, offices and staff facilities salon. On the second floor is located the finance department and exemplary service area. In the basement of this building are public parking garage for 16 vehicles and car accessories stores. The second part of the new building is just overhead. It consists of a private car service for 5 vehicles, stock tires, utility room, car wash and storage of spare parts for cars. Flat roof supporting structure is made of pre-stressed girders reinforced with cross reinforced concrete slab with insulation. Cladding are ventilated insulated facade, supporting part is reinforced. The showroom form the majority of the building envelope glass facade. Finish of floors in office and showroom premises are ceramic tiles. In the Service and garages cast floor resistant to petroleum substances.
|
|
|
Stteel Structure of Auto Showroom
Sztulová, Petra ; Štrba, Michal (referee) ; Hron, Lukáš (advisor)
Bachelor's thesis solves the design and assessment of the load bering structure of car showroom. The building is a single-storey, rectangular shape with dimensions of 15 x 30 m and a height of 7 m. Structure is formed by the roof cladding, purlins, rafters, columns and perimeter walls of glass.
|
|
|
Car show room in Olomouc
Mudrák, Štěpán ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subject of this diploma thesis is structural design of a car showroom building in Olomouc. The layout dimensions are 16 x 37 m, the roof is designed as a 5° slope half span roof with cantilever hanging of 6 m. Roof layout dimensions are therefore 22 x 37 m. The object is designed as a two – storey building with two levels of second floor. Maximum height of the structure is about 9,0 m. The design is based on a study of two materiál variants – timber and steel structure. More suitable variant was chosen and following drawings, structural design report and technical report were processed. Main structural system is designed as a one rigid corner column – girder connection, 6 m axis dimensions. Main structural material is a glued laminated timber, completed with coniferous timber and steel elements. The roofing is supported by rafters which are connected to the main roof truss. Bearing element of floors is a Novatop Element structural systém. The spatial rigidity of structure is ensured by steel stiffeners. Structural analysis was carried out by finite element method in software Scia Engineer 21, where the design of the basic elements for ultimate limit state and serviceability limit state was made. Connection design was processed manuály and with software Idea Statica and Hilti Engineering Suite.
|
|
|
AUTOCENTRUM VW GROUP MIKULOV
Šešulková, Jana ; Hudeček, Vladimír (referee) ; Dýr, Petr (advisor) ; Kacálek, Petr (advisor)
The aim of this bachelor's thesis was to design a new car center of the Volswagen group. The project is based on an architectural study, which was prepared within the subject AG033 – Architecture design studio on the topic of Autocentrum VW Group Mikulov in the 2nd year of bachelor's study. The plot is located in the cadastral territory of Mikulov in Moravia, Břeclav district, It is located in the industrial part of the city, the surrounding buildings are made up of industrial buildings, especially storages and productions. There is also a scrap metal purchase and warehouse. The plot is currently registered as an area intended for construction by production. The plot is located on flat terrain. The proposed object responds to the required functions. It is oriented perpendicular to Jiráskova Street, the main entrances are oriented to the main street towards the built-up part of the city. The building is located longitudinally on the plot and corresponds to its shape. It consists of three objects that are interconnected. Individual objects have their own function. The first building is adapted and designed mainly for sales and car show purposes. This is the most dominant building. It is followed by a significantly smaller and partially hidden storage area, which also includes facilities for employees and hygiene loops. In the last, rear part is the service. This is the second dominant part, highlighted by an illuminated expanded metal facade. The main material on the building is concrete, which is in line with the industrial character of the building and its surroundings. The façade is made of Cetris cement-fiber boards, which resemble the structure of white concrete. In the service building, the facade is solved with an openwork facade made of expanded metal, under which there is a smooth lime-cement plaster of white color. Concrete structures are also copied into the interior, especially by the recognized load-bearing elements in the individual parts.
|
|
|
Car showroom
Kováčová, Zuzana ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The subject of the Bachelor thesis is a static and structural design of a steel construction of a car showroom in Trnava. I tis a two-bay construction with a mono-pitched roof. As a first, the load was calculated, next the structural version was determinet. Structural analysis was made with Dlubal RFEM software. Main load-bearing elements were designed and checked, including reinforcing members, column anchorage and selected connections. Were made a calculations, drawing documentation and technical report.
|
|
|
Prefabricated construction od car-showroom
Wolf, Jiří ; Švaříčková, Ivana (referee) ; Zlámal, Martin (advisor)
Aim of the final thesis is to create loadbearing prefabricated structure of building, which serve like office building and area for car-showroom, and creating static assessment of main supporting parts. For those parts will make drawing documentation of reinforcement and shapes. Computational 3D model for evaluation of internal forces is realized in Dlubal RFEM 5.07 software. For better check and comparison were create 2D spatial bar models of selected frames.
|
guest ::
